View 66056-103_1200982.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

66056
SINGLE/DUAL CHANNEL, HERMETICALLY SEALED, VERY HIGH SPEED OPTOCOUPLER
Mii
OPTOELECTRONIC PRODUCTS DIVISION
Rev 1 7/3/01
Features: * * * * * * DSCC Approved 8102802PX (Dual); and single channel version optocoupler 10 MHz bandwidth typical 1500 Vdc isolation test voltage TTL compatible input and output High radiation immunity Faraday shield to provide high common mode rejection
Applications: * * * * * Military and space Voltage level shifting Isolated receiver input Communication systems Medical systems
DESCRIPTION The 66056 single and dual channel optocouplers consist of LED's optically coupled to two high speed, high gain inverting detector gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns typical. The 66056 is available in military temperature range and military temperature with 100% device screening. The devices are built in eight-pin dual-in-line, hermetically sealed packages and provide high input to output DC isolation.
ABSOLUTE MAXIMUM RATINGS Storage Temperature ............................................................................................................................................ -65C to +150C Operating Free-Air Temperature Range ............................................................................................................... -55C to +125C Lead Solder Temperature ..........................................................................................260C for 10s (1.6mm below seating plane) Peak Forward Input Current (each channel) .................................................................................................40mA (1ms duration) Average Forward Input Current (each channel)...(see Note 1) ............................................................................................ 20mA Input Power Dissipation (each channel) ............................................................................................................................... 35mW Reverse Input Voltage (each channel) ........................................................................................................................................5V Supply voltage - VCC .................................................................................................................................. 7V(1 minute maximum) Output Current - IO (each channel) ........................................................................................................................................ 25mA Output Power Dissipation (each channel) ............................................................................................................................ 40mW Output Voltage - VO (each channel) ............................................................................................................................................7V Total Power Dissipation (per channels) .............................................................................................................................. 175mW NOTES: 1. Derate IF at 0.05mA/C above 25C. Package Dimensions Schematic Diagrams
S in g le C h a n n e l
V cc 8 6
0 .3 7 0 [9 .0 4 0 ] 0 .3 9 0 [9 .9 0 ]
8 7 6 5
DATE CODE
2 A
Vo
YYW W USA XXXX
0 .3 2 0 [8 .1 3 ]M A X
0 .2 8 0 [7 .1 1 ] 0 .3 1 0 [7 .8 8 ] P IN O N E
0 .1 7 0 [4 .3 2 ]M A X
3
K
GND
5
D ual C hannel 0 .0 2 0 [0 .5 1 ] M IN
2 A V cc V o1 1 K V o2 6 8 7
P IN O N E
1
2
3
4
TYPE NUM BER
R E A R V IE W
0 .0 0 7 [0 .1 8 ] 0 .0 1 3 [0 .3 3 ]
0 .0 9 0 [2 .2 8 ] 0 .1 1 0 [2 .8 0 ]
E N D V IE W
.0 2 0 [0 .5 1 ] M A X
S ID E V IE W
NOTE: A L L D I M E N S I O N S A R E IN IN C H E S [M IL L IM E T E R S ]
NOTE: A .0 1 to .1 u F b y p a s s c a p a c ito r m u s t b e p la c e d b e tw e e n V c c a n d G n d
6
A
5
K
GND
5
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St.., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com
3 - 34
66056
Rev 1 7/3/01
SINGLE/DUAL CHANNEL, HERMETICALLY SEALED, VERY HIGH SPEED OPTOCOUPLER
ELECTRICAL CHARACTERISTICS
PARAMETER
High Level Output Current Low Level Output Voltage High Level Supply Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current Single Channel Dual Channel Single Channel Dual Channel
Ta=-55C to at 125C unless otherwise specified.
MIN TYP
5 0.5 9 18 ICCL VF BVR II--O 5 1.0 13 26 1.5
SYMBOL
IOH VOL ICCH
MAX
250 0.6 14 28 18 36 1.75
UNITS
A V mA mA V V A
TEST CONDITIONS
VCC = 5.5V, VO = 5.5V,IF =250A VCC = 5.5V, IF = 10mA IOL (Sinking) = 10mA VCC = 5.5V, IF = 0 (Both Channels) VCC = 5.5V, IF = 20mA (Both Channels) IF = 20mA IR = 10A VI--0 = 1500Vdc, Relative Humidity = 45% ta = 25C, t = 5s
NOTE
1 1,3
1 2
Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level
tPLH tPHL
45 55
100 100
ns ns
RL = 510, CL = 50pF. If = 13mA, ta = 25C RL = 510, CL = 50pF If = 13mA, ta = 25C
3,4 3,5
TYPICAL CHARACTERISTICS TA = 25C, VCC = 5V EACH CHANNEL PARAMETER SYMBOL MIN TYP MAX
Input Capacitance Input Diode Temperature Coefficient Resistance (Input-Output) Capacitance (Input-Output) Output Rise-Fall Time (10-90%) Common Mode Transient Immunity at High Output Level Common Mode Transient Immunity at Low Output Level CIN
vF TA
UNITS
pF mV/C
TEST CONDITIONS
VF = 0, f = MHz IF = 20mA VI--O = 500V f = 1MHz RL = 510, CL = 50pFIF = 13mA VCM = 10V (peak), VO (min) = 2V, RL = 510, IF = OmA VCM = 10V (peak), VO (max) = 0.8V, RL = 510, IF = 1OmA
NOTE
1 1 2 2 6
60 -1.9 10 5 35 1000 10000
12
RI-0 CI-O tr, tf CMH
pF ns V/s
CML
1000
10000
V/s
7
NOTES: 1. Each channel 2. Measured between input pins shorted together and output pins shorted together. 3. It is essential that a bypass capacitor (.01 to 0.1F ceramic) be connected from pin 1 to pin 4. 4. The tplh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse. 5. The tphl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse. 6. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. Vo >2.0V). 7. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. Vo < 0.8V).
RECOMMENDED OPERATING CONDITIONS:
PARAMETER Input Current, Low Level Each Channel Input Current, High Level Each Channel Supply Voltage Fan Out (TTL Load) Each Channel Operating Temperature PART NUMBER 66056-011 66056-012 66056-001 66056-002 66056-101 66056-102 66056-103 SYMBOL IFL IFH VC N TA -55 MIN 0 12.5 4.5 MAX 250 20 5.5 6 125
UNITS
A
mA V C
SELECTION GUIDE
PART DESCRIPTION Single Channel, commercial optocoupler Dual Channel, commercial optocoupler Single Channel, Mil-temp optocoupler tested over full military temperature range (-55 to +125C) Dual Channel, Mil-temp optocoupler tested over full military temperature range (-55 to +125C) Single Channel optocoupler tested over full military temperature range with 100% device screening Dual Channel optocoupler tested over full military temperature range with 100% device screening DSCC Dwg 8102802PX Dual channel optocoupler
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St.., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com
3 - 35

▲Up To Search▲

Price & Availability of 66056-103

	To Download 66056-103 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .